NEMA 14-30 Generator Inlet to Siemens PN Series 100A Plug-On Neutral Interlock Kit & Wiring
Safely connecting a 240V / 30A (14-30) generator outlet to your Siemens PN Series 100A Plug-On Neutral panel requires matching the physical interlock plate to the top-right or top-left breaker slots where your main breaker is located.
Generator NEMA 14-30 Inlet → Siemens PN Series 100A Plug-On Neutral Panel Wiring
Required Hardware Checklist for Siemens PN Series 100A Plug-On Neutral
🔧 Mechanical Interlock Kit
Must match Siemens PN Series 100A Plug-On Neutral Series. Designed for QP-type breakers. Prevents turning on generator power while main utility power is connected.
Find Matching Interlock Kit on Amazon🔌 Outdoor Generator Inlet Box
NEMA 14-30 male inlet box rated for 30A / 240V. Configuration: 4-wire Dryer/Generator Inlet.
Find NEMA 14-30 Inlet Box on AmazonRequired Wiring & Installation Accessories
30A Double-Pole Circuit Breaker
UL-Listed, mandatory for continuous EV charging load under NEC code.
10 AWG THHN Copper Wire (50ft Spool)
Heat-resistant 90°C copper conductor for conduit installation.
Heavy Duty NEMA 14-30 Outlet Receptacle
Industrial Grade 30A / 250V receptacle rated for continuous EV/Dryer loads.
3/4" Schedule 40 PVC Conduit (10ft Lengths)
UV-resistant protection for exposed indoor/outdoor wire runs.
Interlock Compatibility FAQ
Is a mechanical interlock kit compliant with NEC code?
Yes. Per NEC 702.12, an interlock plate physically prevents both the main breaker and the generator backfeed breaker from being turned on simultaneously, fulfilling code safety requirements.
What wire size is needed for a NEMA 14-30 inlet?
A NEMA 14-30 (30A) inlet requires 10 AWG THHN copper wire.